What is an IP address??

IP

1. Short for Internet Protocol address, an IP or IP address is a number (example shown above) used to indicate the location of a computer or other device on a network using TCP/IP. These addresses are similar to those of your house; they allow data to reach the appropriate destination on a network and the Internet.

There are five classes of available IP ranges: Class A, Class B, Class C, Class D and Class E, while only A, B, and C are commonly used. Each class allows for a range of valid IP addresses, shown in the following table.

Class	Address Range	Supports
Class A	1.0.0.1 to 126.255.255.254	Supports 16 million hosts on each of 127 networks.
Class B	128.1.0.1 to 191.255.255.254	Supports 65,000 hosts on each of 16,000 networks.
Class C	192.0.1.1 to 223.255.254.254	Supports 254 hosts on each of 2 million networks.
Class D	224.0.0.0 to 239.255.255.255	Reserved for multicast groups.
Class E	240.0.0.0 to 254.255.255.254	Reserved for future use, or Research and Development Purposes.

Ranges 127.x.x.x are reserved for the loopback or localhost, for example, 127.0.0.1 is the common loopback address. Range 255.255.255.255 broadcasts to all hosts on the local network.

IP address breakdown

Every IP address is broken down into four sets of octets and translated into binary to represent the actual IP address. The below table is an example of the IP 255.255.255.255. If you are new to binary, we highly recommend reading our binary and hexadecimal conversions section to get a better understanding of what we're doing in the below charts.

IP:	255	255	255	255
Binary value:	11111111	11111111	11111111	11111111
Octet value:	8	8	8	8

For an example, let's break down the IP "166.70.10.23" in the following table. The first row contains the separate sections of the IP address, the second has binary values, and the third row shows how the binary value equals the section of the IP address.

IP:	166	70	10	23
Binary value:	10100110	01000110	00001010	00010111
Numerical value:	128+32+4+2=166	64+4+2=70	8+2=10	16+4+2+1=23

Automatically assigned addresses

There are several IP addresses that are automatically assigned when you set up a home network. These default addresses are what allow your computer and other network devices to communicate and broadcast information over your network. Below are the most commonly assigned default addresses for home networks.

192.168.1.0	0 is the automatically assigned network address.
192.168.1.1	1 is the commonly used address used as the gateway.
192.168.1.2	2 is also a commonly used address used for a gateway.
192.168.1.3 - 254	Addresses beyond 3 are assigned to computers and devices on the network.
192.168.1.255	255 is automatically assigned on most networks as the broadcast address.

If you have ever connected to your home network, you should be familiar with the gateway address or 192.168.1.1, which is the address you use to connect to your home network router to change its settings.

Getting an IP address

By default the router you use will assign each of your computers their own IP address, often using NAT to forward the data coming from those computers to outside networks such as the Internet. If you need to register an IP address that can be seen on the Internet, you must register through InterNIC or use a web host that can assign you addresses.

Anyone who connects to the Internet is assigned an IP address by their Internet Service Provider (ISP), which has registered a range of IP addresses. For example, let's assume your ISP is given 100 addresses, 109.145.93.150-250. In this range, the ISP owns addresses 109.145.93.150 to 109.145.93.250 and can assign any address in that range to its customers. So, all these addresses belong to your ISP until they are assigned to a customers computer. In the case of a dial-up connection, you are given a new IP address each time you dial into your ISP. With most broadband Internet service providers, you are always connected to the Internet your address rarely changes. It remains the same until the service provider requires otherwise.